I will second Dick's caution of using any high pressure air or gas. The high flow rates can cause static charge buildup on higher impedance parts, causing over-voltage failures. Keep the flow rate and pressure low....do not use an air compressor hose. The static buildup can happen no matter if the hose is conductive or insulating. The flow of air over the component leads generates a static charge.
John AF6QO On 7/27/2016 6:56 AM, Richard Fjeld wrote: > Be careful if using a vacuum cleaner. A static build-up can develop. > I have seen it cause arcing. That may have been a hose with metal > fittings. > There is also a metal spring inside the hose that can conduct. Perhaps > an attachment with a brush for the hose will avoid a discharge. > > Dick, n0ce > > > On 7/27/2016 2:07 AM, Bill Frantz wrote: >> My K3 (and P3) were used in a very dusty environment in eastern >> Nevada. Some people there compared the dust levels to those at >> burning man. Does anyone have any advice about cleaning the equipment? >> >> 73 Bill AE6JV >> >> --------------------------------------------------------------------------- >> >> Bill Frantz | Re: Computer reliability, performance, and >> security: >> 408-356-8506 | The guy who *is* wearing a parachute is *not* the >> www.pwpconsult.com | first to reach the ground. - Terence Kelly >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
