You may want to note that Elecraft does not recommend cleaning flux at all.
Those working in support and repair for the thru-hole legacy line may
see a board we have to work on that is so covered with flux residue that
it has to be removed.
Even then, we work with cotton swabs in a small area at a time with 99%
iso alcohol.
I once had a K1 repair which had failed because the builder used
something for a flux cleaner. The residue had crept under the ICs,
R-Paks, other components and the connectors. After an extended repair
time, it worked, but I heard a report about a year later that it stopped
working again - I guess I did not remove enough components to clean
under them!
Rosin Flux is better left in place, it is non-conductive if let alone -
but when attempts to remove the flux are used, the flux and cleaner will
produce conductive paths - so if you do remove flux, remove it and its
residue completely or you are likely to have trouble later.
Use a solder with a mildly reactive rosin flux, Kester 285 is one of
those. It does not leave much flux residue and does not need to be
cleaned. Highly reactive flux solder (like the popular Kester 44) does
leave a good deal of flux, but it too usually does not need to be cleaned.
We have morphed the original question - which was about cleaning a K3
(of dust and dirt mainly), so further responses should change the
subject line to something like 'cleaning flux from boards'.
73,
Don W3FPR
On 7/27/2016 5:11 PM, Clay Autery wrote:
As I originally said, "NOT recommending this because it requires a great
deal of
care/experience"...
I use 99% Iso. Alcohol when necessary. And I'm not saying to flood the board with it.
Also not saying to get it near enclosed components... One should use proper instruments
and care when utilizing ANY solvent, TO INCLUDE water... which BTW, is the
"universal solvent".
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
