Chris, I have to take issue with the response you received from Geoff - The K2 command set is a SUPERSET of the Kenwood command set. The K2 also implements commands that would allow the K2 to remain in split if they are properly used, but the program authors have chosen not to support the K2 separately from Kenwood, and have also chosen not to support split operation.
Again, the cancelling of split is NOT a function of the K2, but a function of the way Logger 32 has chosen to handle the K2 --- in other words Logger 32 issues explicit commands that cancel split, and it is not necessary to do that (i.e. the program IS explicitly cancelling split). 73, Don W3FPR > -----Original Message----- >....Response to Chris from Geoff ..... > The answer to your question is basically no. The K2 uses the same > command set as the Kenwood series of radios and in that case also the > FR command will take the set out of split mode. It is a function of > the radio and not Logger32. > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
