I believe the DXLab suite does what you want. Double click on a spot in
Spotcollector and if the spot lists a split frequency -
- Commander puts the K2 into split mode with VFO A on the DX and VFO B on the
split frequency,
- the DXKeeper log is filled out with information from QRZ on-line,
- DXView tells you if the DX is needed for an award,
- Spotcollector tells you if the DX uses LotW,
- Pathfinder looks up the QSL manager,
- Propview give you the propagation forecast for the path between you and the
DX.
Not bad for a double click. Besides, it's all free.
73 de NA8M
John
When I am operating normally (not split operation), I prefer to use
the large VFO knob of the K2 (instead of the smaller RIT knob) to
tune the received station in if it is slightly off my transmit
frequency. To do this I have to put the K2 into split mode.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
