Working to get WSJT 1.7 alpha running with my K3S. I saw some other posts but found no solution. I can Rx just fine, just cannot Tx. Pressing TUNE on the K3S gives Red TX LED and obvious Tx evidence from display with ATU TUNE enabled.
Settings:Radio are Rig Elecraft K3/KX3, COM 7 (correct for my rig), Baud Rtae 38400, Data Bits 8, Stop Bit 2, Handshake None, DTR/RTS blank, PTT Method CAT, Mode USB, Split Operation Fake-it, Poll Interval 1s. Band Hopping enabled, with CAT working fine it seems. The Settings: Radio tab give a Green CAT and Red PTT when tested. But no sign of power out, even though TX LED lights on K3S. MIC is adjusted to 23 such that USB voice gives ALC to 4 with occasional spikes to 5. Increasing MIC while WSJT-X is TX'ing doesn't budge ALC. I must be overlooking some K3S setting (as usual). Appreciate some help! Thanks, 73s, Bret/N2SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/WSJT-X-and-K3S-Tx-tp7622439.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
