Jim, I had the same problems. Switched back to 5.38 and the problems went away.
I have not tried 5.52 to see if the problems were fixed. 73, Tony K4QE On Sat, Oct 1, 2016 at 12:33 AM, Jim McDonald <[email protected]> wrote: > I installed K3 FW 5.50 to use my K-Pod, which I like very much. I have a > couple of weird problems using DXLab now that I can't explain and wonder if > the new FW might be related. > > > > In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes the > frequency in the K3 but it's 850 Hz higher than the frequency that DXLab > sends to the radio. I'm using K3 FSK D with 1275/1445 tones, NOT AFSK. > > > > I don't know if my other problem is attributable to the firmware either. > DXLab's rig control module, Commander, has a nice feature (activated by > clicking on a button in the VFO B panel) that will switch the radio to > split > and turn on the subreceiver (called "dual receive" in Commander). It used > to do both of those but now only turns on split but not the subreceiver. > > > > I'd very much appreciate someone also using FW 5.50 and DXLab would check > to > see if my experience is unique to me or not. > > > > Thanks. > > > > 73, Jim N7US > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
