Jim, You are remembering it incorrectly. The 1, 2, 5, and 10 buttons only turn on SPLIT.
73, Tony K4QE On Sat, Oct 1, 2016 at 9:06 AM, Jim McDonald <j...@n7us.net> wrote: > Joe, > > The pitch in the K3 is still set to 1275 for my 1275/1445 low tones, and WW > still has the Mark Offset of -1275 and an Optimal Offset of 1360. > > I'm referring to the buttons 1, 2, 5, and 10 above the frequency in the VFO > B panel of Commander. They do still turn on split in the radio and offset > the VFO B frequency correctly. I thought they were also supposed to turn > on > my subreceiver and check the Dual receive box in the VFO A panel. Maybe I > am not remembering that correctly. > > 73, Jim N7US > > > -----Original Message----- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe > Subich, W4TV > Sent: October 01, 2016 07:24 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] [K3] FW 5.5 issue?? > > > > In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes > > the frequency in the K3 but it's 850 Hz higher than the frequency that > > DXLab sends to the radio. I'm using K3 FSK D with > > 1275/1445 tones, NOT AFSK. > > An 850 Hz offset *sounds like* either your K3 or WinWarbler has been reset > to 2125/2295 Hz. *CHECK BOTH* "Pitch" in the K3 and "Mark Offset"/"Optimal > Offset" in the FSK panel of WinWarbler's Configuration dialog. > > > I don't know if my other problem is attributable to the firmware > > either. DXLab's rig control module, Commander, has a nice feature > > (activated by clicking on a button in the VFO B panel) that will > > switch the radio to split and turn on the subreceiver (called "dual > > receive" in Commander). It used to do both of those but now only turns > > on split but not the subreceiver. > > I've used DXLab Suite (Commander) for years with the K3 and do not know > what > button in the VFO B panel to which you refer. There are > *two* check boxes in the VFO A panel - one turns split on/off (equivalent > to > holding A -> B on the K3 front panel) and the other turns the Sub RX on/Off > (equivalent to tapping Sub on the K3 front panel). > > I'm using FW 5.52 at present and all radio control features of DXLab Suite > work just the same as they have in prior versions of the K3 firmware. > > 73, > > ... Joe, W4TV > > > On 10/1/2016 12:33 AM, Jim McDonald wrote: > > I installed K3 FW 5.50 to use my K-Pod, which I like very much. I > > have a couple of weird problems using DXLab now that I can't explain > > and wonder if the new FW might be related. > > > > > > > > In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes > > the frequency in the K3 but it's 850 Hz higher than the frequency that > > DXLab sends to the radio. I'm using K3 FSK D with 1275/1445 tones, NOT > AFSK. > > > > > > > > I don't know if my other problem is attributable to the firmware either. > > DXLab's rig control module, Commander, has a nice feature (activated > > by clicking on a button in the VFO B panel) that will switch the radio > > to split and turn on the subreceiver (called "dual receive" in > > Commander). It used to do both of those but now only turns on split but > not the subreceiver. > > > > > > > > I'd very much appreciate someone also using FW 5.50 and DXLab would > > check to see if my experience is unique to me or not. > > > > > > > > Thanks. > > > > > > > > 73, Jim N7US > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to anthony.scandu...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com