Jeff,
I have no idea what you are doing wrong, but here are a few thoughts:
After making the menu change, are you exiting from the menu? Tap the
MENU button.
Are you 'pulling the plug" when you say you turn the radio off and back
on? Just like your computer, you must use the POWER button if the state
is to be saved.
Do you have anything plugged into the USB or RS-232 port that might be
causing a command to reset the menu entry? Pull out the USB cable
and/or the RS-232 cable and try again.
73,
Don W3FPR
On 10/24/2016 9:24 AM, Jeff wrote:
Good morning. I am having a problem getting my K3S to save in the config menu
the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works fine.
Then I turn the radio off and back on and the PTT-PTT setting is back to
OFF-OFF. What am I doing wrong? How do I get the Config menu to save the
PTT-PTT setting to RTS-DTR?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
