Jim: If the K3-Mini is powered up through RRC but the ’target’ K3/K3S is not powered up and online, you’ll get a warning signal. This means that the mini is not ’seeing’ the host transceiver.
Power up the K3/K3S and see if that doesn’t resolve the issue. If you’re still having issues, then check your cables for proper connection and that you indeed have internet between the K3-Mini site and the K3/K3S. Hope this helps, Barry Baines, WD4ASW Westborough, MA (residence) Folkston, GA (ham station) > On Oct 29, 2016, at 5:26 PM, Jim Cary <[email protected]> wrote: > > I just packed up both my control and remote systems and moved them down to my > ZF QTH, where they will be permanent. > > I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up > the remote unit yet/ > > When I powered up the mini, and turned the volume control I got a three tone > warning signal. The light over the aux/mic cable is flashing yellow, which > according to the Remote Rig manual means the SIP connection has failed…. but > it isn’t clear what that means or what to do about it. I’ve checked and > doubled checked all the connections and they look good. > > Does anyone not in the CQ contest (!!!) have an idea? > > Jim > W2SM > ZF2LC > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
