I am an occasional user of digital modes. My K3 is conntected to my PCs via in-line-out cables.
Usually, I used PC speakers gain to about 50-75% of max, and Line level on K3 was about 10 or so. ALC used to be 4 bars, with 5th bar flickering, or lower. Recently, I cannot setup line-in level as it was before. Even if I setup both PC audio to 100% and Line to max (60), I can hear very weak sound. VOX (DATA A) works properly, but audio signal is very weak. If I setup Monitor to max (60), I can hear sound but it is very "dirty". Where to start? :) Regards, Dragan, 4O4A -- View this message in context: http://elecraft.365791.n2.nabble.com/Low-Line-In-level-tp7624013.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
