I think that PC speakers level is OK. On my headset, on my speakers tone sounds just fine, clean.
I tried to ground PC - no difference. When connected to MIC input, I tried various BIAS settings. With all three settings (no BIAS, L and H), result is the same except that with High BIAS it needs less sound level to trigger VOX. Again, with MIC input, sound is OK, but it is pulsing. Sorry for my English, I don't know how to explain "pulsing" :) I can hear sound well. When K3 meter is showing power, it is stable and no fluctuation. When meter shows ALC, it is "pulsing" slowly from zero to, say, 5 bars and back to zero, with frequency of 1 pulse in second (or so). It looks like ALC is not only limiting sound level, but dropping it back to zero. I didn't notice any RX problem on other modes, CW or FSK Digi, not even on SSB which I use very rarely (with HM-2 mic). -- View this message in context: http://elecraft.365791.n2.nabble.com/Low-Line-In-level-tp7624013p7624093.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
