Dragan,
Does the K3 still respond to microphone input as it did before?
If the answer is YES, then I would suspect the soundcard is the source
of your problem.
73,
Don W3FPR
On 11/14/2016 12:48 PM, Dragan 4O4A wrote:
I am an occasional user of digital modes.
My K3 is conntected to my PCs via in-line-out cables.
Usually, I used PC speakers gain to about 50-75% of max, and Line level on
K3 was about 10 or so. ALC used to be 4 bars, with 5th bar flickering, or
lower.
Recently, I cannot setup line-in level as it was before.
Even if I setup both PC audio to 100% and Line to max (60), I can hear very
weak sound. VOX (DATA A) works properly, but audio signal is very weak.
If I setup Monitor to max (60), I can hear sound but it is very "dirty".
Where to start? :)
Regards,
Dragan, 4O4A
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Low-Line-In-level-tp7624013.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
