I didn't exactly do this, but I did investigate the effects of distortion on CW 
signals. I disconnected my P3 from the K3 and set the IF to 7 MHz. so it would 
act like a standalone spectrum analyzer. 
I was interested in whether a class-C amplifier I had built would sharpen the 
keying enough to create noticeable clicks. The amplifier used minimal fixed 
bias to allow a small amount of resting plate current in transmit mode, with 
full class-C operating bias provided by a grid resistor. 
I noted a broadening of the base of the signal on the P3, indicating that the 
signal was not as clean as the K3 alone.  But listening with another receiver 
on either side of the S9+30 dB signal didn't reveal audible clicks. I also 
asked other operators to listen and there were no reports of clicks.
I am sure that attempting to use that amplifier (a pair of 813s) on SSB would 
have gotten me ridden out of town on a rail!

Vic 4X6GP

> On 22 Dec 2016, at 23:10, K9MA <[email protected]> wrote:
> 
>> On 12/22/2016 11:40, Jim Brown wrote:
>> IMD also affects CW. What we call CW is not "continuous wave," it is a 
>> continuous wave that is 100% modulated by a rectangular wave. That 
>> rectangular wave is rich in harmonics, and excites IMD. We hear it as clicks.
> It would be interesting to see how much IMD it takes to significantly 
> increase key clicks of a "clean" keyed CW signal, like that of the K3.  I'd 
> expect the effect to be small, compared to that on an SSB signal for the same 
> level of IMD, but I could be wrong.  I suppose a simple test would be to have 
> a local friend with a P3 watch the signal as I turned down the supply voltage 
> on my K3.  Has anyone tried anything like that?
> 
> 73,
> 
> Scott  K9MA
> 
> 
> -- 
> Scott  K9MA
> 
> [email protected]
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to