Hi George,
Do you mean DATA/USB/CW/etc. mode information, or something else? I
have fldigi 3.22 displaying DATA mode during normal operation, using
Rigcat and K3.XML as the rig control template. Are you saying you can't
see a mode change after accessing the drop-down (next to the main
frequency readout)? You should be able to see mode and filter, and you
should be able to change them.
73,
matt W6NIA
On 1/1/2017 7:02 AM, George Kidder wrote:
Hi gang,
I am running fldigi with my K3, and everything works as indicated in
the manual. It would be useful if fldigi was able to poll the K3 for
mode information, and set itself accordingly. I suspect that a
modification of the K3.xml file might accomplish this, but I don't
know enough about the programming to see where.
Has anyone succeeded in getting mode information from the K3 to fldigi?
Thanks,
George, W3HBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Always store beer in a dark place. - R. Heinlein
Matt Zilmer, W6NIA
[Shiraz]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
