Hi Brian,
Thanks for the reply. I had found that "howto" file, but can't make
much sense of it. The current K3.xml file relays changes between the
rig and the two little blue boxes under the frequency display, but these
changes are not reflected in the fldigi operate mode, nor do changes in
the op mode result in changes in the K3. Nor do the changes in these
little boxes get reflected in the log entry, which is very annoying.
So do your modifications correct these problems? If so, could I have a
copy of it.
73 and Happy New Year,
George
On 1/1/2017 10:37 AM, Brian Waterworth wrote:
Yes, I have had success with my KX3 and FlDigi by modifying the rig xml for
the K3 as a starting point. Here is the howto:
http://www.w1hkj.com/FldigiHelp/rig_xml_page.html
It took me a little longer to figure out the xml file's relationships, but
this howto didn't exist then.
Once you see the linkages among the various XML elements, you will be
changing the k3.xml file with ease.
Have fun !!
regards,
Brian
VE3IBW / CG3IBW
Canada's Sesquicentennial (https://wp.rac.ca/special-event-canada150/)
On Sun, Jan 1, 2017 at 10:02 AM, George Kidder <[email protected]> wrote:
Hi gang,
I am running fldigi with my K3, and everything works as indicated in the
manual. It would be useful if fldigi was able to poll the K3 for mode
information, and set itself accordingly. I suspect that a modification of
the K3.xml file might accomplish this, but I don't know enough about the
programming to see where.
Has anyone succeeded in getting mode information from the K3 to fldigi?
Thanks,
George, W3HBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
