Ray,
Have you tried running the TX Gain Calibration on the KX3?
It may be that the KX3 wattmeter is not well calibrated.
If you do the TX Gain Calibration manually, it must be done on each band.
The KX3 Utility automates the process.
73,
Don W3FPR
On 1/2/2017 11:55 AM, [email protected] wrote:
Don and others,
The good news is that you were right: the RJ-45 connectors in the
control cable were not making good contact. I fixed that and PA ON
operation of the KXPA100 is now working.
The bad news, however, is that in Basic operation with PA OFF, the
KX3/KXPA100 puts out full power, but the most I can get out of it with
PA ON is 50-60 watts. The attenuator is set for OUT/AUTO and there is
no more than 1 or 2 watts reflected power.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
