Thanks Fred, I have the book will look at it.. Fred Fred Moore email: [email protected] [email protected] phone: 321-217-8699
On 4/1/17 8:13 PM, Cady, Fred wrote: > > Have a look at the How to Set Up and Interpret the PX3 Display in the > PX3 manual where this is explained (Or the Why??? section in the KE7X > KX-Line book). Basically the PX3 and KX3 are different bandwidth > detectors so the signal levels displayed generally won't be the same. > They are two different instruments meant to show two different > things. The KX3 s-meter shows you the signal level you have to work > with in the KX3 with its bandwidth and signal processing active and > the PX3 is far more useful to show the relative signals across the band. > > > Cheers, > > Fred KE7X > > For all KE7X Elecraft books see ww.ke7x.com > > > > > ------------------------------------------------------------------------ > *From:* Elecraft <[email protected]> on behalf of Fred > Moore <[email protected]> > *Sent:* Saturday, April 1, 2017 4:38 PM > *To:* [email protected] > *Subject:* [Elecraft] kx3 px3 > > Anyone have any thoughts on getting the scale on the px3 to match the > s-meter on the kx3.. > > when the kx3 is showing a s9 signal the px3 is showing about s6.. 3 > s-units.. > > I have the pre-amp set to 20db, with a precision HP signal generator a > 50mv signal does read S9 on the KX3 like it should, the px3 reads about > 3 S units lower.. > > All cables are secure, and are the supplied cables between the kx3, > and px3 > > Scale and Reference do not effect the delta between the readings.. > > surely there must be an adjustment I am missing in the PX3 > > This is a new PX3 built it yesterday morning, everything else works > properly.. ????? > > latest firmware KX3 and PX3 > > Regards.. Fred > > > -- > Fred Moore > email: [email protected] > [email protected] > phone: 321-217-8699 > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
