I would like to have a front panel that is designed according to these
two rules:
1. Use physical controls only: buttons, knobs, switches. (Not a "smudge
screen".)
2. The state of every control should be obvious by its position,
rotation, dial, or adjacent LEDs; or, the control should be located
directly adjacent to a screen area where its state is displayed.
IOW, it is annoying to operate a control on one side of the panel and
having to look half way across the panel to the other side to see what
the state of that control is.
I think if those two rules were followed you'd have a really satisfying
rig to operate.
73,
Drew
AF2Z
On 05/30/17 17:36, ke9uw wrote:
I was wondering if the K3 display could be replaced by an updated display,
one that looks like the ones on the newest rigs from Japan. Could it be
displayed on the monitor connected to the svga on P3? Just wondering :)
-----
Chuck, KE9UW
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Display-is-Dated-tp7631264.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
