Hi Don, thanks for your answer and Explanation. CW WGHT is known but not helpful in this case.
I'll try to explan: CW WGHT is set to 800Hz. I'am operating in USB, using CW-In-SSB. I can answer the station. But station cannot read my signal, I try to answer with an stored CW Memory because I am lazy. Now I have to change mode from SSB to CW to get CW Memory ... and so on with the next SSB-session answering a cw Station again. This is, for my understanding, a bit too much: Change mode, activate cw keyer etc. Its easier to have "Extended CW memories" only for CW-IN-SSB in SSB-mode. Kind regards, 73 de Martin, DL1MTG 2017-07-18 16:07 GMT+02:00 Don Wilhelm <[email protected]>: > Martin, > > The CW in SSB option already exists in the KX3. Turn to page 37 in the > manual and look at the CW WGHT menu description for how to turn it on and > off. > With it turned on, your CW will be transmitted when touching the paddles > even though the mode is in SSB. Your signal will be heard by the other > operator (listening in SSB mode) at whatever sidetone pitch you have set in > the KX3. > > 73, > Don W3FPR > > On 7/17/2017 3:14 PM, Martin Theodor Grewe wrote: > > >> Well, one big finding was "doing CW in SSB mode" so called *C**W-IN-SSB*. >> The frequency is at >> SHF contest work extremly important - a small change in freq and the QSO >> is >> lost. Therefore >> it is a pleasure to call in SSB, station is answering in CW, very weak >> signal: *C**W-IN-SSB *is possible. >> And now the request: station did not get my call, I have to activate >> Voice-Keyer again! But stop, >> He can only read my CW signal - lets activate the CW-Keyer... ups, have to >> change mode from SSB to >> CW - to activate CW keyer: frequency lost!!! Station lost, no QSO!! To >> explain further: I also now >> the "SSB/CW VFO Offset" - but this is not helpful in >> "transverterbusiness". >> >> I'd like to get something like "working in SSB", hear an answer in CW, >> activate memory 3 or 4 which is only >> used in "*C**W-IN-SSB", *to send a CQ-Call from memory 3 or an "QRZ QRZ >> DL0LN DL0LN" from >> memory 4 etc. in SSB - CW-IN-SSB oc. >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
