There are multiple ways to do this, some more complicated than others.
One way is to run the KPA500 Control/Display program on a local PC and
then log into it with a remote control package such as Teamviewer. And,
that's only one of many.
73,
Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn
On 7/28/2017 10:49 AM, [email protected] wrote:
Hello,
This is my 2nd attempt to get this into the digest.
Is there a way to remotely cause the KPA500 to switch
between OPERATE and STANDBY?
With the new Flex 2.0 Software, the entire flex
radio can be operated over IP. Ultimately, there
ought to be a way to allow the KPA500 to switch Standby/Operate
over IP in tandem with the Flex SDR 2.0 software.
Next question, and this may be too hard to do. Is there a
way for a remote operator to ascertain the KPA500's SWR/Pwr
remotely over IP, so I won't have to beam an IP camera to the
Elecraft front panel?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
