Hi Wes,
By a combination of trial and error personal preference, this is what I
settled on as soon as I started with WSJT-X. I choose to NOT use split
because I like to have the sub-RX down on the CW segment below 50.1
while I'm using the main RX with WSJT-X. The trial and error part was
that I discovered that the K3 would not TX if I sent any commends to it
from WSJT-X.
SO -- I'm using DATA-A and VOX. I see the sub-second delay that you do.
BTW -- I use VOX for ALL modes, CW, SSB, RTTY, and WSJT modes. No problems.
73, Jim K9YC
On 7/31/2017 12:19 PM, Wes Stewart wrote:
I suggest setting "Settings->Radio->Mode" to "None" and setting
the rig to USB-DATA-A sub-mode manually on both VFOs
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
