On 31/07/17 20:19, Wes Stewart wrote: > I noted that when my transmit interval occurred, there seemed to be > about a one and a half second delay before the K3 began to transmit. I > began an exchange of email with Bill, G4WJS, about this issue. I quote > from one of his: > > "If you are seeing a 1.5s delay then that is because CAT commands sent > before PTT, even if PTT is "virtual" due to using VOX, are taking > roughly that long. The K3 series is problematic in that certain CAT > commands can take a long time to complete
On 12/8/17, Bill G4WJS posted a message to the hamlib-developer list concerning a patch to k3.c to "Take out unnecessary delays in K(X)3(S) back end". This was incorporated into versions of hamlib subsequently distributed with WSJT-X. I've found that it greatly improved control of the K3S. So, use WSJT-X 1.8.0-rc2 or later, and use the version of hamlib/rigctl/rigctld distributed with it. 73, Richard G4DYA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
