Assuming it is in the vicinity of the K3, use the station power supply. If it’s somewhere else, just about any wall wart will work. Spec is 200 mA typ., 1.0A max.
Ken K6MR From: Sid Frissell<mailto:[email protected]> Sent: Wednesday, August 23, 2017 20:46 To: [email protected]<mailto:[email protected]> Subject: [Elecraft] Power source for KAT500 Just got my new KAT/KPA500 on the August Special. I have both units all wired, tested and ready to go except for the 12 to 15 VDC power connection for the KAT500. What are you experienced KAT/KPA owners using for this power source? What amperage is required? Advice would be appreciated, please. Sid. NZ7M Sent From Sid Frissell's iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
