Sid,
The KPA500 requires up to 1 amp when tuning. If you have nothing else
connected to the AUX 12V on the K3/K3S, then that can power the KAT500.
If the AUX 12V is being used by some other device (P3 for instance),
then you can wire the KAT500 to the same power supply that is powering
the K3/K3S.
73,
Don W3FPR
On 8/23/2017 11:44 PM, Sid Frissell wrote:
Just got my new KAT/KPA500 on the August Special. I have both units all wired,
tested and ready to go except for the 12 to 15 VDC power connection for the
KAT500. What are you experienced KAT/KPA owners using for this power source?
What amperage is required? Advice would be appreciated, please.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
