Andy, This may be a dumb question, but did you reconnect your antenna feed line? I can't tell you how many times I've made that mistake. :-)
73 de, Ian, KM4IK On Oct 15, 2017 3:51 PM, "NB8F" <[email protected]> wrote: > Today I went about upgrading my K3S with the KBPF3 board and a 6khz filter. > I moved all my filters down one slot and put the 6khz filter in the first > slot. I installed the KBPF3 board, turned it on in the config etc. > > I then went to the K3 utility and configured my filters, all seemed to go > well. > > I turned the radio on after connecting all the cables and the pan adapter > does not show any signals. It is getting frequency information and changes > as I move the dial. > > I have the cable connected into IF OUT on the radio and IF IN on the P3, > and > I have tried both of the serial cables that came with the radio. > > Connection to the computer works, the radio itself boots with no errors, > but > nothing shows on the panadapter. > > See video attached for any help. > https://youtu.be/Md3ILmdJLDI > > Thanks in advance for any help. > > Andy (NB8F) > > > > ----- > NB8F - Andy > Elecraft K3S - #11282 / KX2 - #1791 > Elecraft owner since June 2017 > Ham since March 2015 > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
