On 10/18/2017 9:28 PM, K4MWB wrote:
I'm mostly a CW op, so I'd assume raising the 400-500 Hz range and suppressing the higher frequencies would help.
With typical filter widths, there is no real value to RX EQ on CW. I tend to leave 0.40 and 0.80 flat and set 0.05, 0.10, 2.40, 3.20 to -16. 0.20 and 1.60 are either flat or a slight (-3) roll off. The nice thing about the K3 is that it will store separate RX EQ for CW and SSB so setting one will not mess up the other mode. 73, ... Joe, W4TV On 10/18/2017 9:28 PM, K4MWB wrote:
Joe and Jim, thanks for the equalization advice. I'm mostly a CW op, so I'd assume raising the 400-500 Hz range and suppressing the higher frequencies would help. I'll tinker with it. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
