Once again the good/bad/indifferent K3 audio surfaces. I do not get it -
never have. The K3 is so audio customizable that it should be pleasing
to nearly every user (I say nearly, as there are some whom will never be
happy). To make a long story short, here is link to my current settings.
Of course, they are my settings and may not please everyone.
****
**The following are the settings I am /_currently_/ using on 40, 75, 160
for armchair copy (meaning very reduced hiss, no ANF warbling, and
pleasing listening). My RX audio goes through amplified Behringer studio
speakers with bass/treble adjustments.
**
**
Note: I often make RX Eq changes depending upon mood, attitude, boredom,
and allergies/colds - as needed.
The speaker adjustments: bass and treble both set to the middle notch
K3 settings:
(Config Menu):
AGC DCY - NORM
AGC HLD - 0
AGC PLS - NORM
AGC SLP - 4 to 6 (low setting reduces artifacts from the
Automatic Notch Filter)
AGC THR - 12
AGC F - 120
AGC S - 20
Shift - 1.25
Width - 2.7
(front panel):
RF Gain - 90 (sometimes less)
ATT - ON
(Menu):
RX EQ 1 -2
2 0
3 +9
4 +12
5 +11
6 +14
7 +7
8 -16
Be sure to read the "Noisy K3" section on http://www.w3fpr.com/ -
excellent information!
The disclaimer: Your mileage for the above settings may (will) vary -
depending upon speaker selection, personal preferences, and your hearing
acuity.
Note: I made all of my settings by hand, using the K3 menus - thus
affording instant gratification. I used to do all the EQ stuff with
outboard devices. With the advent of my K3, all those devices took a
one-way ride to a hamfest.
Bill W2BLC
**
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
