I keep my dummy load connected to ANT 2 on my KXPA100. Might as well have it connected somewhere.
wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Nov 28, 2017, at 6:22 AM, Don Wilhelm <[email protected]> wrote: > > Paul, > > There is some stray coupling between ANT1 and ANT2, but no direct path. > The unused antenna is not grounded. One reason is that it can be used to > feed the subRX AUX ANT input when using diversity. > > 73, > Don W3FPR > > On 11/28/2017 2:36 AM, Paul Ormandy wrote: >> Hi all, >> When messing around today with antennas, I had my aerial connected only >> to >> Ant 1 and discovered that when selected, Ant 2 was capable of receiving >> signals with no antenna connected to it, albeit at a much reduced >> signal. I would have thought the unused >> port would have been earthed out?? > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
