Jim,
Are you setting your audio correctly to produce 4 bars with the 5th bar
flickering on the ALC meter? If not, you will not transmit properly.
See the article on my website www.w3fpr.com. Scroll down in the left
column to the last article and click the link.
Ignore the recommendations on the internet and many data mode
applications to set the power to max and adjust the power with the audio
level - it just does not work that way with Elecraft transceivers.
73,
Don W3FPR
On 2/18/2018 5:00 PM, James Bobo wrote:
Just trying to get on FT8 with K3. Receive fine but unable to transmit.
Settings are as follows:
Com1, 38400,DB 8,2,No handshake,DTR Com1, Data/Pkt
What am I doing wrong? Any help would be appreciated.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
