I am assuming you are running WSJT-X.
I don't think you can use the same COM port for the CAT Control and PTT
Method. If you don't want to use a separate COM port for PTT then you
should be able to get it to work by selecting CAT instead of DTR.
Mike - KI0HA
On 2/18/2018 16:00, James Bobo wrote:
Just trying to get on FT8 with K3. Receive fine but unable to
transmit. Settings are as follows:
Com1, 38400,DB 8,2,No handshake,DTR Com1, Data/Pkt
What am I doing wrong? Any help would be appreciated.
73, Jim, W5ODD
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
