Don.. I did do the EEINIT ..ANYWAY..it works now and I'm a happy camper as they
say!! But I am going to go thru the whole menu and set it up!! Thanks for your
help!!
73s Bob W5RG
From: Don Wilhelm <[email protected]>
To: Bob Gibson <[email protected]>; Carl Clawson <[email protected]>;
"[email protected]" <[email protected]>
Sent: Wednesday, February 21, 2018 7:44 PM
Subject: Re: [Elecraft] POWER LOCKED
Bob,
That must have been set on by the prior owner.
Had you done an EEINIT, it would have wiped those menu items back to
factory defaults.
You might want to go through the menus (both user and CONFIG) to see if
the other menu setting match your operating preferences.
That is a part of "getting to know your K3" - especially important when
buying a used one. You never know why the prior owner had selected
particular menu items.
73,
Don W3FPR
On 2/21/2018 8:32 PM, Bob Gibson via Elecraft wrote:
> WOW THAT WORKED TU TU...Thanks Carl..very much...it worked!!!!
> 73s Bob W5RG
>
>
> From: Carl Clawson <[email protected]>
> To: "[email protected]" <[email protected]>
> Sent: Wednesday, February 21, 2018 6:37 PM
> Subject: Re: [Elecraft] POWER LOCKED
>
> Another thing to try:
>
> Press and hold the Menu button for a second to enter the Config menu.
>
> Rotate the VFO B knob until you see the PWR SET entry. Tap '1' and see if
> it unlocks your power control.
>
> This is a feature that was introduced to keep other ops from messing with
> transmit settings. It locks power, compression, and mic gain.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
