Which monitor setting are you using? If you have selected "Fast"
monitor, you may not hear the TX Gate (or EQ, compression, etc.).
The fast monitor is "pre-DSP" audio that avoids the latency (delay)
in the DSP processing.
73,
... Joe, W4TV
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of Richard
Sent: Saturday, March 17, 2018 7:54 PM
To: Elecraft Reflector <[email protected]>
Subject: [Elecraft] K3S TX Noise Gate
When I listen to myself in the monitor while setting Tx EQ and
compression, I hear the fans in the background, so I thought I’d try
the Transmit Noise Gate.
I was a recording engineer, so I know what a gate is and what it
should sound like.
>
When I follow the manual instructions on how to
access it through CONFIG TX GATE, how to tap 1 to turn it on and off,
and how to use VFO A to adjust it, nothing happens. Zero. There is
absolutely no gate action, no change in the sound as I run the
adjustment from one end to the other.
> What might I be doing wrong?
Richard - W4KBX
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
