Richard, I thought the issue was TX Gate. I use a Heil mic and respect the Heil reference, personally, using the digital recorder to listen to playback, I don't find his settings good for all. YMMV.
Good luck. 73, Bill K9YEQ -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Richard Sent: Sunday, March 18, 2018 8:07 PM To: [email protected] Cc: Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] K3S TX Noise Gate May I draw your attention to the bottom of this page. https://heilsound.com/heil-amateur-radio/support/dsp-settings/all-things-elecraft/ But then, what does Bob Heil know about audio? Richard - W4KBX > On Mar 18, 2018, at 1:25 PM, Don Wilhelm <[email protected]> wrote: > > Richard, > > Remove the boost on the high end. > You can reduce all bands if you want to maintain the same curve. > It is better not to boost, but cut instead. > > 73, > Don W3FPR > > On 3/18/2018 1:09 PM, Richard wrote: >> Bill, >> Tx EQ: >> 50 = -16 >> 100 = -12 >> 200 = -6 >> 400 = 0 >> 800 = 0 >> 1200 = +3 >> 2400 = +9 >> 3200 = +12 >> This works well for me. >> Richard - W4KBX >>> On Mar 18, 2018, at 10:53 AM, Bill Johnson <[email protected]> wrote: >>> >>> Do you have the equalizer set higher levels or lower on the upper audio >>> range? >>> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
