Hmmm. On the one rig USB and RS232 works fine. On the other rig RS232 works but not USB. N2TK, Tony
-----Original Message----- From: N2TK, Tony [mailto:[email protected]] Sent: Thursday, May 24, 2018 7:04 PM To: '[email protected]' <[email protected]> Subject: RE: [Elecraft] K3 - USB Tried swapping the KIO3B Main Board. Something on the board broke. Guess I need to order another board. N2TK, Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of N2TK, Tony Sent: Thursday, May 24, 2018 6:49 PM To: [email protected] Subject: [Elecraft] K3 - USB Hooked up my backup K3 so I could add a mod on the other K3. I can't connect to USB anymore with the backup K3. Verified that USB is selected in Config > RS232 > USB. Swapped the KIO3B Digital I/O board between the two rigs. I can't transfer the problem. The only thing plugged into both rigs is the Powerpole and USB cable. I am using the same USB cable to go between both rigs. In Win 10 >Device Manager > Universal serial bus controller, I see added "Generic USB Hub" when I plug in the USB cable. What could I be missing or check? Tnx for any feedback N2TK, Tony ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
