Tony,
The computer must also enumerate a COM port that is associated with the
adapter in the K3(S).
If it goes not, go to the FTDI website and download the drivers.
73,
Don W3FPR
On 5/24/2018 6:49 PM, N2TK, Tony wrote:
Hooked up my backup K3 so I could add a mod on the other K3. I can't connect
to USB anymore with the backup K3.
Verified that USB is selected in Config > RS232 > USB.
Swapped the KIO3B Digital I/O board between the two rigs. I can't transfer
the problem.
The only thing plugged into both rigs is the Powerpole and USB cable.
I am using the same USB cable to go between both rigs.
In Win 10 >Device Manager > Universal serial bus controller, I see added
"Generic USB Hub" when I plug in the USB cable.
What could I be missing or check?
Tnx for any feedback
N2TK, Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
