Watch Control Panel --> Device Mangler --> Ports while you plug in the
USB cable to the PC. You should see a new COM port come up. That's the
port you use to talk to the radio. It's faintly possible you are
missing or have an old driver, but Windows almost always installs the
correct driver transparently when you plug in the cable. Unplugging the
cable will cause that port to disappear.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 5/24/2018 3:49 PM, N2TK, Tony wrote:
Hooked up my backup K3 so I could add a mod on the other K3. I can't connect
to USB anymore with the backup K3.
Verified that USB is selected in Config > RS232 > USB.
Swapped the KIO3B Digital I/O board between the two rigs. I can't transfer
the problem.
The only thing plugged into both rigs is the Powerpole and USB cable.
I am using the same USB cable to go between both rigs.
In Win 10 >Device Manager > Universal serial bus controller, I see added
"Generic USB Hub" when I plug in the USB cable.
What could I be missing or check?
Tnx for any feedback
N2TK, Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
