I think we’re talking about two different pairs of screws: 

- The thumb screws in the KXPD2 are identical in length (with blunt tip). I’m 
sure that’s not Mike’s issue. 

- The other screws are the 2-56 pan-heads that hold the paddle together. These 
come in from the back side. It’s possible they’re shorting to the case when the 
paddle is cinched down. I proposed a workaround while he awaits a replacement 
paddle.

73,
Wayne
N6KR


> On Jun 17, 2018, at 8:57 AM, Nr4c <[email protected]> wrote:
> 
> I can’t remember, but are the screws IDENTICAL?  Are the ends the same?  
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Jun 17, 2018, at 2:37 AM, Michael Jarvis <[email protected]> wrote:
>> 
>> Hello, 
>> 
>> I'm a fairly new owner of a KX2 with a KXPD2 paddle, and I just noticed this 
>> evening that something is causing the paddle to get "stuck" sending dots. I 
>> have backed off the contacts and verified that the little wires aren't 
>> shorted, and I seem to have narrowed down the problem to how snugly it is 
>> attached to the KX2. 
>> 
>> If I tighten then thumb screws finger-snug, it starts sending dits as if 
>> it's shorted. Backing off the thumb screws a bit seems to help with the 
>> issue. Obviously there's a short somewhere, but I'm not sure where to check. 
>> I'm not sure why the tightness of the thumb screws on the KXPD2 would cause 
>> a short. 
>> 
>> Does anyone have any suggestions on what to try next? I'm leaving for a 
>> camping trip tomorrow, and I'm taking the KX2 with me. I had hoped to use 
>> the KXPD2 paddle, but it looks like I may be packing one of my other paddles 
>> for this trip just in case. 
>> 
>> Any suggestions will be appreciated! Thanks!
>> 
>> 73, Mike Jarvis - N5MAJ



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to