I can’t remember, but are the screws IDENTICAL? Are the ends the same?
Sent from my iPhone ...nr4c. bill > On Jun 17, 2018, at 2:37 AM, Michael Jarvis <[email protected]> wrote: > > Hello, > > I'm a fairly new owner of a KX2 with a KXPD2 paddle, and I just noticed this > evening that something is causing the paddle to get "stuck" sending dots. I > have backed off the contacts and verified that the little wires aren't > shorted, and I seem to have narrowed down the problem to how snugly it is > attached to the KX2. > > If I tighten then thumb screws finger-snug, it starts sending dits as if it's > shorted. Backing off the thumb screws a bit seems to help with the issue. > Obviously there's a short somewhere, but I'm not sure where to check. I'm not > sure why the tightness of the thumb screws on the KXPD2 would cause a short. > > Does anyone have any suggestions on what to try next? I'm leaving for a > camping trip tomorrow, and I'm taking the KX2 with me. I had hoped to use the > KXPD2 paddle, but it looks like I may be packing one of my other paddles for > this trip just in case. > > Any suggestions will be appreciated! Thanks! > > 73, Mike Jarvis - N5MAJ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
