Hello, I'm a fairly new owner of a KX2 with a KXPD2 paddle, and I just noticed this evening that something is causing the paddle to get "stuck" sending dots. I have backed off the contacts and verified that the little wires aren't shorted, and I seem to have narrowed down the problem to how snugly it is attached to the KX2.
If I tighten then thumb screws finger-snug, it starts sending dits as if it's shorted. Backing off the thumb screws a bit seems to help with the issue. Obviously there's a short somewhere, but I'm not sure where to check. I'm not sure why the tightness of the thumb screws on the KXPD2 would cause a short. Does anyone have any suggestions on what to try next? I'm leaving for a camping trip tomorrow, and I'm taking the KX2 with me. I had hoped to use the KXPD2 paddle, but it looks like I may be packing one of my other paddles for this trip just in case. Any suggestions will be appreciated! Thanks! 73, Mike Jarvis - N5MAJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
