Jim,
Do you have WSJT-X configured to use the USB CODEC for both input and
output?
Do you have anything plugged into the LINE IN jack on the back of the
K3S? Anything plugged in there will take priority over the internal
soundcard.
Is the MIC SEL menu set to LINE?
73,
Don W3FPR
On 6/25/2018 10:33 AM, Jim Sheldon wrote:
For some reason I can't get WSJT-X to pull the input sound or send
output sound to the K3S through the USB port. I know I have some K3S
parameter(s) set wrong, but so far I haven't been able to figure out
which ones or how to change them.
I had this working before so not sure what I did to change it.
Feel like a total dummy, but at 76, I do forget some things - LOL
Any help would be greatly appreciated.
Jim Sheldon, W0EB
Windows 10 PRO 64bit -I have the USB CODEC in the K3S configured as
sound in and out in device manager and nothing plugged in to the rear of
the K3S other than external speakers in the speaker jack - nothing to
MIC or LINE In or LINE Out.
Menu Settings:
MIC SEL is FP.L
MIC + LIN ON
CONFIG Settings:
KIO3B nor
LIN OUT nor 010
MIC BTN OFF
L --MIX -- R A B
RS232 USB
SPKRS 2
SPKR+PH YES
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
