I previously had a thread on problems I was having the internal sound card on FT8. I was getting no output from the PC to the radio. So thinking that the problem was how I had the internal sound card and WSJT-X set up, I switched back to using my SignaLink, which had worked perfectly before. It worked fine for a while, but then the failed output problem returned. Mysteriously, it would start working again and then after a time fail again.
At one point I found that there were two USB Audio Codecs and the standard Realtek driver associated with the speaker settings. I selected the one one not then i use, and the output returned. Then after another failure, I found that there was only one USB Audio Codec associated with the output. This morning I rebooted the computer with nothing connected and found only the Realtek driver. I added the K3S USB cable, and one of the Codecs returned. I added the SignaLink cable, and the second Codec returned. By selecting the correct USB Codec, I was back in business. So somehow the Codec driver for the SignaLink is getting changed or wiped out. I assume that when I used the internal sound card, the wrong Codec was selected. I hope this helps anyone else having similar problems. Any insights on how the CODEC is wiped out would be much appreciated. Lee, KV5M ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
