Grant,
Better than calling sales, email [email protected] and ask for an RSA
number.
Do not send anything until you have the RSA number and shipping
instructions. Shipping without that paperwork will only confuse things
in the repair process.
73,
Don W3FPR
On 9/22/2018 6:53 PM, Grant Bright W5XB wrote:
Many thanks Don,
Good to know...the tx does ok at 12 watts, but when you turn the power up
(hear the click), the power drops off to zero, and the swr disappear.
I have a good Collins wattmeter, that shows the 12 watts fine...but I do
have a dummy load. I'll have one tomorrow and try doing a calibration with
the utility.
If it is the KPA3, I hope I can pull it and send just it to Elecraft. I'll
call Monday about that.
Many thanks for your help.
73, Grant, W5XB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
