Surely the first thing to check would be the CONFIG:KPA3 setting, wouldn't it? If it is NOT INST, change it to PA NOR.
73, Rich VE3KI Occam again... Chuck Jack KE9UW Sent from my iPhone, cjack > On Sep 22, 2018, at 6:15 PM, Michael Blake via Elecraft > <[email protected]> \ > wrote: > Is the resettable 2A circuit breaker worth checking first? > > > Mike - K9JRI > > > > > > > > On Sep 22, 2018, at 7:06 PM, Don Wilhelm <[email protected]> wrote: > > > > Grant, > > > > Better than calling sales, email [email protected] and ask for an RSA > > number. > > Do not send anything until you have the RSA number and shipping > > instructions. \ > > Shipping without that paperwork will only confuse things in the repair > > process. > > 73, > > Don W3FPR > > > > > On 9/22/2018 6:53 PM, Grant Bright W5XB wrote: > > > Many thanks Don, > > > > > > Good to know...the tx does ok at 12 watts, but when you turn the power up > > > (hear the click), the power drops off to zero, and the swr disappear. > > > > > > I have a good Collins wattmeter, that shows the 12 watts fine...but I do > > > have a dummy load. I'll have one tomorrow and try doing a calibration with > > > the utility. > > > > > > If it is the KPA3, I hope I can pull it and send just it to Elecraft. I'll > > > call Monday about that. > > > > > > Many thanks for your help. > > > > > > 73, Grant, W5XB > > > > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
