Is the resettable 2A circuit breaker worth checking first?
Mike - K9JRI > On Sep 22, 2018, at 7:06 PM, Don Wilhelm <[email protected]> wrote: > > Grant, > > Better than calling sales, email [email protected] and ask for an RSA > number. > Do not send anything until you have the RSA number and shipping instructions. > Shipping without that paperwork will only confuse things in the repair > process. > > 73, > Don W3FPR > > On 9/22/2018 6:53 PM, Grant Bright W5XB wrote: >> Many thanks Don, >> >> Good to know...the tx does ok at 12 watts, but when you turn the power up >> (hear the click), the power drops off to zero, and the swr disappear. >> >> I have a good Collins wattmeter, that shows the 12 watts fine...but I do >> have a dummy load. I'll have one tomorrow and try doing a calibration with >> the utility. >> >> If it is the KPA3, I hope I can pull it and send just it to Elecraft. I'll >> call Monday about that. >> >> Many thanks for your help. >> >> 73, Grant, W5XB >> >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
