I have used for years a K3 on EME with WSJT using Line In/Out audio. Recently got a K3S and I am now using USB (CODEC) audio in and out of the radio. In WSJT-10 they have Rate In/Rate Out monitors that should normally run at 1.000. Using the K3 analog audio these always stayed right on 1.000 but now that I am using the USB audio they are jumping around quite often and getting out of range indicated in WSJT with a red marker. I have tried two different computers and the same result. I tried changing the sample rate in the computer audio settings but no change in the problem. I plan to go back to analog Line In/Out on the K3S unless someone has an idea on how to settle down the Rate In/Out fluctuations. I have not found anything in the K3S that might affect this. You can reply off line if you like. 73 Mike K4PI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
