Mike, I would be interested in what you find. Since Microsoft and then HRD did upgrades I have not been able to get WSJT to work with HRD and my K3S, therefore, the logging from FT* to HRD will not work. When I try to set things up I get a message: Hamlib error: IO error while opening connection to rig. I am running a USB cable which worked fine until all the upgrades. Very interested in what you find. Bob, [email protected] > On October 1, 2018 at 11:49 AM Mike Greenway <[email protected]> wrote: > > > I have used for years a K3 on EME with WSJT using Line In/Out audio. > Recently got a K3S and I am now using USB (CODEC) audio in and out of the > radio. In WSJT-10 they have Rate In/Rate Out monitors that should normally > run at 1.000. Using the K3 analog audio these always stayed right on 1.000 > but now that I am using the USB audio they are jumping around quite often and > getting out of range indicated in WSJT with a red marker. I have tried two > different computers and the same result. I tried changing the sample rate in > the computer audio settings but no change in the problem. I plan to go back > to analog Line In/Out on the K3S unless someone has an idea on how to settle > down the Rate In/Out fluctuations. I have not found anything in the K3S that > might affect this. You can reply off line if you like. 73 Mike K4PI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
