Don, Thanks for that.
Just in case anyone else asks, I thought you could only select .1 or .2 seconds delay under ADVANCED settings in WSJT-X. It turns out, you can enter any delay you want. So, problem solved. 73, John WA1EAZ > On Nov 13, 2018, at 2:54 PM, Don Wilhelm <[email protected]> wrote: > > John, > > Contact the WSJT-X developers to see if any command they issue would disable > K3 TX Inhibit. Since the exchange on FT8 is so rapid, my guess is that they > may very well disable TX Inhibit as a "safety" measure. > > There is nothing about DATA A mode operation of the K3/K3S that would cause > TX Inhibit to be disabled. > > 73, > Don W3FPR > > On 11/13/2018 2:35 PM, John Stengrevics wrote: >> I asked this question previously and was told that the WSJT-X would not >> effect TX INHIBIT on the K3S. >> In trying to confirm this just now, TX INHIBIT is clearly disabled when I >> call CQ on FT8 digital mode. >> Any thoughts? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
