Tom, I was told that. All I can say is that there is no delay from the K3S when I transmit on WSJT-X. I increased the delay to .3 seconds under ADVANCED in WSJT-X settings and the problem is solved.
73, John WA!EAZ > On Nov 13, 2018, at 11:12 PM, Tom <tom...@videotron.ca> wrote: > > Hi, > WSJT-X does not touch TX Inhibit. > The only command that WSJT-X sends is a TX; command to enter transmit mode or > it asserts DTR or RTS. The same is true for Yaesu and Icom transceivers. Now > if the radio does this itself behind the scenes, that is another story. But > 100% for sure WSJT-X does not send the TX inhibit menu command. > 73 Tom > va2fsq.com > > > -----Original Message----- From: John Stengrevics > Sent: Tuesday, November 13, 2018 2:35 PM > To: Elecraft Reflector > Subject: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S > > I asked this question previously and was told that the WSJT-X would not > effect TX INHIBIT on the K3S. > > In trying to confirm this just now, TX INHIBIT is clearly disabled when I > call CQ on FT8 digital mode. > > Any thoughts? > > John > WA1EAZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom...@videotron.ca > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com