The levels from the RX I/Q are very low, so you might not hear anything. Pages 26 and 27 in the manual talk about using that for computer-based SDR applications.
Also, check the RX I/Q menu setting. If that is OFF, you won’t get any output from that jack. Finally, fldigi does not use I/Q signals for its waterfall. It uses the regular audio output from the PHONES jack. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Jan 5, 2019, at 8:42 PM, Kevin F. <[email protected]> wrote: > > Thanks for the prompt reply, I guess the question that I would like to answer > is, if I were to plug in to both sides of the RX I/Q port should I hear > anything at all? If I shouldn't then great, if I should then I'm going to > need to figure out what's going on with my radio such that I can't heard > anything at all... > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
