Select AM mode and then go to CONFIG:FLTX. Or (better) use the he configuration tab of the K3 utility, as Don suggested.
Victor 4X6GP > On 10 Jan 2019, at 21:04, Mpridesti <mpride...@yahoo.com> wrote: > > Ok understand except how do you select AM and have it stay? > > Went to the CONFIG menu and selected FLTX (it shows CW in al FL numbers) > Tried to select a different mode I.e. AM but it does not stay AM > > Regards, > Mark, K1RX > > >> On Jan 10, 2019, at 1:49 PM, Victor Rosenthal 4X6GP <k2vco....@gmail.com> >> wrote: >> >> This error is caused by selecting a filter other than the 2.8 or 2.7 kHz >> filter as the transmit filter. Use CONFIG:FLTX to select that filter for >> CW/DATA/SSB. (Except if you have FM (13 kHz) or AM filters (6 kHz) you must >> select those filters in the FM and AM modes). >> >> 73, >> Victor, 4X6GP >> Rehovot, Israel >> Formerly K2VCO >> CWops no. 5 >> http://www.qsl.net/k2vco/ >>> On 10 Jan 2019 20:08, Mpridesti via Elecraft wrote: >>> Strange issue >>> I setup the K3 for diversity RX >>> Now I can not transmit CW. I get an ERR TXF >>> indication. What needs to be changed to correct? >>> Regards, >>> Mark Pride >>> 603-231-8965 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com